Jul 04, 2014 micromax dongle MMX352G 3G driver for windows 8 Finally i had solve the issue of Micromax MMX353G USB Modem 'No Device found in Windows8/8.1' by this simple steps. Unlocked Micromax MMX352G USB Dongle / Modem. 3G ZTE Modem Dashboard and Drivers Airtel E173cs-1 USB Modem / Dongle Airtel Huawei E1731 USB.

I have windows 8 RTM( Enterprise Edition ) running on Dell inspiron Laptop with Micromax MMX 300G. Well all versions of Micromax MMX modem will work fine. Just follow the steps below: Method 1 (Older Method works fine with Windows 8): 1. uninstall the software if already installed.2. Download Replay Dota 1 Tournament 2013. Open the modem in new windows and set its ( modem_installation.exe and show_modem.exe ) compatibility to windows7 then press OK. Now install the software, then restart the system.

Connect the modem and start the software ( it shows no device ) then exit the application from the task manager. Open the Device manager ( control panel >Administrative tools >Computer management ) 6. Go for Other devices, simply uninstall all the drivers related to modem there (better uninstall both with or without yellow mark) 7. Go to Action menu and click on Scan for hardware changes. Now simply open the MMX usb manager and it works fine.

Method 2 (Updated Article January 2014 for Win 8/8.1 both): 1. Install the MMX modem application in compatibility mode as above, then restart your system.

Next go to your installation folder as: x64 bit OS –>C: Program Files (x86) MMX353G 3G USB Manager Driver Win7_64 x32 bit OS –>C: Program Files MMX353G 3G USB Manager Driver Win7_32 3. Copy the file cmnsusbser.sys and paste it to C: Windows System32 drivers folder do replace if any older version is already present. Better save the older file before replacing it with new one. Now, go back to installation folder and simply: • right click cmnsmdm.inf and click install, • then right click cmnsser.inf and click install. So its done then, only note that you must open the application from the desktop icon.

Enjoy your MMX 3G modem in windows 8.1. Have fun guys. I’ve got a del inspiron 1525 and the os was recently upgraded to win 8 pro. I followed all ur steps to run my micromax mmx300g modem, but it’s still showing “initialization” in the usb manager interface and also the device is not shown in My Computer window. One more thing I wanted to inform you is that, initially, while installing the modem the device gets disconnected (i mean it disappears from the My Computer window)any help is appreciable and kudos for this extremely useful discussion. Steps to Install Micromax Modem. Step 1- Install The software normally as You install!

Step 2- Choose yes when software asks for Reboot! Step 3- After the reboot Open the Software from Desktop.! Step 4- Now Open the DEVICE MANAGER.

There you will find 3-4 Unknown Device! Step 5- Now move your mouse pointer to unknown Devices and. Right click choose update driver Software. Step 6- Now Choose Browse my computer for Driver Software Step 7- Now Again Choose Browse Step 8- Now go to this locationC: Program Files MMX310G 3G USB Manager Driver Step 9- Now repeat the same steps for all Unknown Devices.

Step 10- Now After doing all the steps you will see network in your MMx310g Software. Step 11- Good Luck n happy Browsing!! For help call @ •.

Dear Nivesh, thanx for your previous help regarding usb modem connection in windows 8. Now I experience some problem on creation a system repair disk (A CD) on my windows 8 pro desktop. It shows the following error while I start the job with 2 moserbear CD one after another.

Title: WINDOWS 8 RECOVERY DISK COULD NOT CREATE WITH ERROR CODE 0xC0AA0301 After that I update motherboard bios firmware. Then I start the process with a sony DVD RW disk. The job complete without any error. Later I repeat the process with simple SONY blank CD. But the job end with a error mentioning that writing speed may not support by the system. After that I start the process with another moserbear blank CD as it`s writhing speed is upto 52x.

But unfortunately it again gives same ERROR CODE 0xC0AA0301. Here is my HCL desktop configuration at a glance- CPU:- CORE I5 650 @ 3.20 GHz, 2 CORES, 4 LOGICAL PROCESS RAM:- 8GB MBD:- PEGATRON IPMIP-DV REV: 1.02; BIOS BY HCL, HCL MAKE MBD NAME DAYFLOWER-LSD. OPTICAL DRIVE:- TSST corp CDDVDW SH-S202I ATA device. HDD:- SEAGATE 1TB SATA •. Download Radiohead Hail To The Thief Zip Rar Free.

Micromax MMX 352G is a very good plug and play 3G USB Modem and can give upto 7.2 mbps downlink. The modem supports the Operating Systems Windows 7/Vista/XP Linux Ubuntu 9.10, 10.04 Mac 10.6 But with the release of Windows 8, the upgraded Windows users are facing some problems with this modem. The modem Micromax MMX 352G is not working on Windows 8 due to its incompatibility. The modem drivers are not installed on Windows 8. But don't worry, because I am going to share a trick with you by which you can use your MMX 352G 3G USB Modem on your Windows 8 PC.

STEPS To install the Micromax 352G Modem Drivers in your Windows 8 PC, please follow the steps given below: • Connect the modem to your PC. • Open the folder containing the installation files. • Save the settings for ShowModem.exe and Modem_installation to run in compatibility mode with Windows 7. (You can do this by right clicking on each of the files and selecting Troubleshoot Compatibility). • Now run ShowModem.exe and install the drivers. • After the installation, restart your PC.

• Connect the modem to your PC and run MMX352G 3G USB manager and it will show ‘No Device’. But don’t worry, the original trick starts from here! • Now open Control Panel >>Device Manager, then under Other Devices, just uninstall all the drivers related to the modem. • After that go to Action menu and click on ‘Scan for hardware changes’, then Windows 8 will automatically scan for the changes took place in the hardware and it will be automatically updated. (NOTE: The drivers you uninstalled in the previous step will not be shown under Other Devices after this step also.).